Gembird 3D Printer Filament PETG 1.75mm 1Kg Multiple Colours

Gembird PETG 3D printer filament, 1.75 mm, 1 kg. Polyethylene terephthalate (PETG) is an amorphous thermoplastic of the polyester family and has a perfect combination of clarity and strength.

The clarity of PETG approaches that of Acrylic and impact resistance is close to polycarbonate. Easy to print with a variety of 3D printers. Very high strength filament. Impact Resistant - PETG is less brittle than acrylic, and is a lower cost alternative to polycarbonate.

Superior chemical resistance when compared with many other transparent plastics. Environmentally friendly as it is considered 100% recyclable. Versatile and easy to use. Very low shrinkage makes printing large flat surfaces a breeze. Easily printed on any acrylic, glass, Kapton and other printing platform.

Specifications

Material: PETG, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Density at 240°C: 1.27 g/cm3
Melt Flow Index at g/10min, 200°C/ 5kg: 20
Melt Point: 220 - 260°C
Heat-Deflection-Temperature at 0.455 MPa: 60 - 80 °C
Yield Strength at 5mm/min: 50 kg-cm2
Impact Strength: 8.7 kg/cm
Ensile Break: 120%
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 200mm diameter x 67mm height x 53mm central hole

System Requirements

A 3D printer with 1.75 mm extruder of temperature around 240 °C, suitable for PETG filament.